How to make a dust cloud from scratch
I’ve tried a lot of things to create dust clouds, and this is the first time I’ve made a one-off one-sheet cloud.
I’m not going to tell you how to do it, but it’s pretty straightforward.
If you’re interested, I’ve put together a simple tutorial, but I’ve also included a more advanced tutorial in case you’re more interested in trying to create something really interesting.
So here’s how it works.
Prepare the materialsStep 1a.
Cut a piece of fabric, about a foot long.
Fold it into two pieces.
Cut two more pieces of fabric.
Cut one more piece of cloth.
Fold the fabric back in half, leaving about 1 inch of fabric in each half.
Fold in the folded fabric half.
Repeat this process for the second piece of folded fabric.
Fold one more time in each of the four directions.
Fold both halves in half.
Now the pieces are ready to be cut out.
Fold each piece in half so the seam is exactly on the top of the fabric.
This gives you an idea of where the edges of the piece are.
Fold again so that the seam at the bottom of the seam runs straight down.
This will create the “cloud” of the paper.
Now cut the pieces into two.
Now you can see the pieces, with the dust cloud at the top.
Cut each piece of paper into two parts.
Cut the paper out of the pieces you cut.
Cut out the paper pieces with a pen and then cut the paper into the shapes you want them to look like.
Now put the paper back together and fold the two pieces of paper back in.
Fold up the paper, and then fold back down to the top again.
Fold this all back up again.
Repeat step 19 for the other two pieces and so on.
Now take the folded paper and cut it into the shape you want it to look.
Cut it out of this paper.
Cut all the paper parts together.
Now glue each piece together using your glue gun.
Take the paper and glue it in place.
Now add the dust, and press the paper firmly into the surface of the glass.
Add some more dust.
Finally, take the paper off the glass, and use your fingernail to make holes through the paper so the dust is easy to get to.
Glue the paper in place again.
This is what you’ve got.
Now make a small hole in the middle of each paper piece and make another small hole for the dust.
Repeat steps 2 and 3 for the next paper piece, and so forth.
Cut and glue the dust in place as you normally would.
Now you’ve made one small piece of dust, the first part of a paper cloud, and it looks something like this:Step 32.
This next step is optional, but very useful.
I’d like to get rid of all the excess paper.
To do this, I use a piece I made from a small piece from a piece you can buy at craft stores, and glue each side of it together.
This way you’ll get more dust out of it, and I can get rid